Before setting up a Wi-Fi connection, make sure your client supports WPS.
There are 3 ways to set up a WPS connection.
Option 1: via WPS button
1) Press and hold the WPS button for 3 seconds. The WIFI indicator will begin to flash blue.
2) Enable WPS on your personal device within 2 minutes.
3) Your personal device should connect to your device wirelessly.
Option 2: via Start WPS button in Web UI
1) Log in to the Home page (refer to "How can I access the Home page?").
2) Go to Settings -> WiFi -> WPS.
3) Click the start button in Method 2.
4) Enable WPS on your personal device within 2 minutes.
5) Your personal device should connect to your device wirelessly.
Option 3: via a PIN
1) Log in to the Home page (refer to "How can I access the Home page?").
2) Go to Settings -> WiFi -> WPS.
3) Switch on Router's PIN in Method 3.
4) Enter below PIN code on your device to connect to WiFi.